Sam4s ER-430 SERIES - Miscellaneous Programming; Program 9999 - Mode Key Password Programming (for ER-230 EPROM V1.008 and Later Only); Use Password to Change Mode

224 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Miscellaneous Programming
Program 9999 - Mode Key Password Programming (For ER-230
EPROM v1.008 and later only)
A password can be programmed for the mode switch key. This provides security to avoid
unauthorised operator to access other mode. To activate this feature, please set option #33 “Mode
Password Function” to YES in System Option. Please see “System Option Programming” in
“Program Mode Programming” for detail.
WARNING: Please Program a password before activate this feature.
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 9 9 9 9, press the SBTL key.
3. Enter a password (up to 4 digits); press the X/TIME key.
4. Press CASH key to finalise the program.
Use Password to Change Mode
1. Switch to the mode you wish to enter by press MODE function key.
2. Press the CHG2 key (the key located under MODE key as circled in the example), enter
password, then press CHG2 key again.
CHECK 2 CONV1 10 6
CHG 2
1 CHG1 9 5
3 11 7 SBTL
MO DE #/NS CLERK PO RA
4 12 8
CASH
6
ERROR
CORR
5 4
-%
9
VOID
8 7
+%
RETURN
1
MACRO1
X/TIME
RECEIPT
FEED
PLU CLEAR -
CANCEL
0
SCALE
2
.
3
00
CASH
9 SBTL 9 9 9
X/TIME
CHG2
CHG2
PASSWORD