238 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Program 1600 - Machine Number Programming
The machine number is printed on the register receipt. Program a machine number so that any receipt
can be identified with the store or register where the transaction took place.
Programming the Machine Number
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 1 6 0 0, press the SUBTL key.
3. Enter a machine number (up to 5 digits); press the X/TIME key.
4. Press the CASH key to finalise the program.
6 0 0 SUBTL1
X/TIME
CASH
To Next Page
Loading...
