Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Getting Started • 43
Programming a Price/HALO for Keyboard PLUs
NOTE: This PLU Price/HALO Programming is only for 1 Price Level PLUs. For detail, please
find out Price Level setup according to Service Mode Programming, Memory Allocation
Scan. Then refer to Program Mode Programming - Program 200 - PLU Price/HALO
Programming for detail.
If a PLU is open-price, set the HALO (high amount lock out) here. If a PLU is preset-price, set the
preset price here.
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 2 0 0, press the SUBTL key.
3. Press a PLU key on the keyboard.
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset
price. (Note: Do not enter the decimal. The maximum preset price you can enter is
$9999999.) Press the X/TIME key.
5. To program additional PLU Price/HALO, repeat from step 3, or press the CASH key
to finalise the program.
PLU
X/TIME
Price/HALO
2 0 0 SUBTL
CASH
To Next Page
Loading...
