106 • P-Mode Programming ER-5215M Electronic Cash Register v2.23
Program 400 – PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock
and PLU reports.)
1. Turn the control lock to the P position.
2. To begin the program, enter 4 0 0, press the SBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
Press a PLU key on the keyboard or scan the item.
Press the first PLU key that is to be deleted and press the last PLU key.
Enter the number of the PLU you wish to delete and press the PLU key.
Enter the number of the first PLU in a range you wish to delete and press the PLU
key. Enter the last number in the range; press the PLU key.
4. Press X/TIME key.
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
4 0 0 SBTL
PLU
PLU PLU
PLU
PLU PLU
X/TIME
CASH
To Next Page
Loading...
