CHAPTER 2
10
2.1. Verify interface type of SAM4S printer
Check the interface of printer from the ‘Self-Test’. The self-test checks the
following:
1. Make sure paper roll has been installed properly.
2. ② Turn on the power while ① holding down the FEED button.
The self-test begins.
pic1)
ELLIX30/30III/35/35III Series, ELLIX40/45 Series
pic2)
GIANT-100 / GIANT-150 / GIANT PRO
Installation of
SAM4S printer
2
CHAPTER
To Next Page
Loading...
