Sam4s GIANT-100 - Installing SAM4 S USB to Serial Printer (Windows 10)

CHAPTER 2
21
2.6. Installing an USB to Serial printer (Win 10)
1. Run the installer. Click the 'Cancel' button and close the window, when
the 'SAM4S Printer Installer' window displayed.
2. Connect the printer that has been changed to 'USB to Serial(VCOM)
mode' to PC and turn on the power.
3. Open 'Device Manager'.
4. It should be recognized as
'USB Serial Device'. Proceed
with driver installation for
normal communication and
COM port distinction. Click
the 'Update Driver' button.
5. Click the 'Browse my
computer for driver
software(R)'.
6. Select the 'ParallelInf' folder
in the 'SAM4S Printer driver'
folder. And click the 'Next'
button in bottom.