Sam4POS 6600/4800II Operators Manual v2.9 Advanced Application Operations • 107
Soft Check Posting
The Sam4POS terminals use a Soft Check tracking method for storing orders. It is not necessary to print
the check at each posting. The PRINT CHECK key is used to print the check for presentation to the
customer. The check will print the check at the designated receipt printer for the station.
The PRINT CHECK key can be programmed to automatically service the check when pressed, this
eliminates the need to press the Store Check key after printing then check.
Soft Check Tracking Program Notes:
Discuss these options with your authorized Sam4POS dealer or refer to the Sam4POS Program Reference
Manual.
Set the options for the Recall Table (Check) key as desired; Options set here include:
• Manager Required
• Enforce Seat Number
• Compulsory for all Sales
• (Check #) Assigned by Register
• Opening Employee has Exclusive Access
• Guest Count Entry Required
• Other related options
Set the options for the Store Table (Check) key; Options set here include:
• Manager Required
• Tax Exempt
• Recall Check Link
• Compulsory Alpha Text
• Print Receipt After Store Check
• Print Check# on: R/P, J/P
• Manager Required For Servicing Negative Balance
• Auto Check Management
Other options associated with guest check tracking can be found in System Option programming:
• Set Program Mode Options - Options/Guest Check Options
o Review and set options as necessary
To Next Page
Loading...
