Sam4POS 6600/4800II Operators Manual v2.9 Appendix • 203
Multi ECR (3 or Less)
NOTE: If you have an installation with 3 IPTran-LT units, all three have a separate batch and work
independent of each other (separate batching, separate reporting).
Multi ECR ( 4 or More)
NOTE: If you have multiple PDC’s and a TwinTran Server there is only one batch and it can be controlled at
any of the registers. Also note, that PDC’s are paired to a specific TwinTran Server. A PDC from one site will
not work with the TwinTran Server from another site.
To Next Page
Loading...
