Sam4POS 6600/4800II Operators Manual v2.9 Basic Operations • 47
Sign Off
There are several ways to sign off the current employee.
While in the Register Mode:
1. Type the current employee operating code using the 10-key pad then touch the EMPLOYEE key.
2. Type “0” then touch the EMPLOYEE key.
3. Tap the Sign Off icon .
4. Press the back arrow icon at the top of the Register Mode screen to return to the main menu
screen; press the icon on the main menu screen to return to the main sign-on screen.
Clerk Interrupt
If allowed, a new employee can sign on while a transaction being processed by another employee is still in
progress. When a different employee signs on while the current employee is in middle of a transaction,
the current employee’s transaction is suspended (stored in a check file). Under the new employee, a new
transaction can be entered and completed.
When the employee processing the suspended transaction signs on again, the suspended transaction can be
continued and finalized.
To Next Page
Loading...
