64 • Basic Operations Sam4POS 6600/4800II Operators Manual v2.9
Not Found PLU
Designed to be used in a scanning system, the NOT FOUND PLU feature allows the operator to
immediately enter basic PLU information for an item that is not in the PLU file. If the "Not Found PLU"
message displays when a PLU is entered (or when an item is scanned) the operator can press or touch the
NOT FOUND PLU key and will be prompted to enter PLU price, and if programmed, the descriptor and
linking information. The item is registered immediately.
1. Scan or enter a PLU that is not in the PLU file; a continuous error tone sounds notifying the operator
the item just scanned is not in the database. The NOT FOUND PLU notification displays:
2. Press YES to add the item; The REGISTER PLU entry box displays:
3. Enter the PLU DESCRIPTOR, PRICE (for all price levels), GROUP assignment and PLU
STATUS GROUP assignment for the item, press OK when done.
4. The item is registered in the current transaction and added to the PLU database.
To Next Page
Loading...
