106 P Mode Programming SPS-2000 Program Manual v1.30
Print Key Program Note
AUTOMATICALLY PRINT MEAL ORDERLY
If yes the print key will send requistions in sequence by Group number, i.e. the first time touched, group 0
items will print, the second time touched, group 1 items will print, and so on.
Price Level (1-20) Program Note
PREVENT ZERO PRICE SALE
ALTERNATIVE PRICE LEVEL
If the Prevent Zero Price Sale option is set to YES, the ZERO AMOUNT message will display if you
attempt to register a PLU with a zero price on the selected level. If Prevent Zero Price Sale and
Alternative Price Level are set to YES, the alternative price level will register if you attempt to register a
PLU is a zero price on the selected level.
Price Inquiry Program Note
Y=Stay Down/N=Pop Up
If a Stay Down, when a second PLU is registered after a stock or price inquiry, the result will be an
inquiry on the second item. If Pop Up, when a second PLU is registered after a stock or price inquiry, the
result will be the registration of the item rather than an inquiry for the item.
Recall Check Key Program Notes
DRIVE THRU FEATURE ENABLED?
Set to Yes if the tracking file is used for drive thru windows in fast food operations. In this case, the
recall key will automatically recall the lowest tracking number from the appropriate tracking file. Note:
see Store Check key programming. You must also set the appropriate Store Check key with the drive thru
option enabled.
SCAN CHECK#
Allows use of scanner to enter check number. Note: At version 2.00x or later, if check numbers are
assigned by register, the operator will be prompted to choose SCAN CHECK or OPEN A NEW CHECK
when the RECALL CHECK key is touched.
Store Check Key Program Note
ENABLE DRIVE THROUGH OPTION
Set to Yes if the tracking file is used for fast food operations. In this case, the store key will automatically
assign the next tracking number from the appropriate tracking file and store the transaction. Note: see
the programming for the Recall Check key. You must also set the appropriate Recall Check key with the
drive thru option enabled.
Waste Key Program Note
AFFECT ON PROJECTIONS
If Yes, the projection report will consider actual sale plus waste. If No, the projection report will only
consider sales.
To Next Page
Loading...
