Sam4s SPS-300 Series - SD Card Operation

126 • S-Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
Function Key Assignment
Any programmable key location may be reprogrammed with a function from the list of
available functions on page 129 of this manual. The default program installs the functions as
they are shown with the standard key legends.
To change the function on a specific key:
1. At the SM control lock position menu, press 6 for Key Assignment
programming. The KEY ASSIGNMENT screen displays:
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
0
2. Press any key location. The current key assignment is displayed:
KEY ASSIGNMENT
KEY NUMBER : 322
CURRENT ASSIGNMENT
CASH
ENTER NEW CODE,
PRESS CASH
0
3. Enter a new key code from the list of "Function Key Codes" on page 129 and
press CASH, or press PAGE DOWN to display a list of key codes on the screen.
FUNCTION KEYCODE
--------------------------------
NLU#1 - NLU#150(1-150)
ONE 301
TWO 302
THREE 303
FOUR 304