Sam4s SPS-300 Series - Flash ROM Update by PC Utility

134 • S-Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
9. Press PAGE DOWN to view page 7 of the RS232C port program:
PORT 1 PROGRAM PG7
PRINTER TYPE 0
14:STAR SP-200
15:STAR SP-298
16:STAR SP-300
17:STAR TSP-200
10. Press PAGE DOWN to view page 8 of the RS232C port program:
PORT 1 PROGRAM PG8
POLE DISLAY TYPE 0
0:EPSON 1:ICD
RESERVED
11. Refer to "RS232C Settings Screen Program Notes" on the next page to fill the
fields for each port.
12. Press the CLEAR key to finalize and return to the SERVICE MODE screen.