Sam4s SPS-300 Series - Printer;Printers

SAM4s SPS-300 Operator's & Programming Manual v1.34 Introduction • 19
 Press PAGE DOWN to view the remainder of the PROGRAM MODE page 2
menu:
PROGRAM MODE P2 
7.MACHINE NO.
8.PC SCHEDULE TIME
9.TRAINING MODE P/W
DEC.LEVEL ACTIVATE TIME
00.SCAN
SM (Service Mode)
SERVICE MODE 
0. HW TEST
1. CLEAR ALL TOTALS
2. CLEAR GRAND TOTAL
3. CLEAR PLU FILE
4. FLASHROM INFORMATION
5. MEMORY ALLOCATION
6. KEY ASSIGNMENT
 Press PAGE DOWN to view the remainder of the SERVICE MODE menu:
SERVICE MODE 
7. IRC OPTIONS
8. RS232C PORT
9. SD CARD OPERATION
00.CLEAR CURR.BATCH