Sam4s SPS-300 Series - Function Look up (1-2)

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 203
4. Press CASH from the last field or press PAGE DOWN to view the last page of
charge function key options:
CHARGE 1 PROG. 
SHOW TIP ON(0:REG, 1:PINPAD 2
2:PRINT TIP LINE ONLY)
5. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.