212 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
CURRENCY CONVERSION 1-4
1. Press one of the CURRENCY CONVERSION keys to view the appropriate
currency conversion function key options:
CONVERSION #1 PROG.
DESC : CONV1
RATE 0
NUMBER OF DECIMAL 0
2. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
CURRENCY CONVERSION 1-4 Program Notes
DESC
Alpha
numeric
12 character
You can program a unique descriptor for each foreign
currency. The default descriptors are CONV 1-4.
RATE 5 digits
Enter the exchange rate of up to 5 digits (do not enter the
decimal point). See the examples on the next page.
NUMBER OF
DEC.
1 - 6
Enter a number from 0 to 6 to indicate the decimal position
of the exchange rate. Count the decimal position from the
right. See the examples below.
Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates can be stated as “foreign currency in dollars”,
or “dollars in foreign currency”. Use the rate stated in “dollars in foreign currency”
when you are programming this section.
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency).
RATE: 13720
NUMBER OF DEC.: 5
The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency).
RATE: 11024
NUMBER OF DEC.: 2
To Next Page
Loading...
