Sam4s SPS-300 Series - Recd on Acct 1-3

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 215
ERROR CORRECT
1. Press the ERROR CORRECT key to view the error correct function key
options:
ERR CORRECT PROGRAMMING
DESC : ERRCORR 
KEY HALO 0.00
(0 : NO LIMIT)
KEY DISABLE N
UNDER MGR CONTROL N
2. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
ERROR CORRECT Key Program Notes
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a unique descriptor. The default descriptor
is ERRCORR.
HALO
7 digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
KEY DISABLE Y or N Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.