Sam4s SPS-300 Series - Waste

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 225
MODIFIER 1-5 Key Program Notes
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a unique descriptor. The default descriptors
are MOD1 - MOD5.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
AFFECT PLU # Y or N
Select Y, if you wish the modifier entry to modify the PLU
and cause a different item/price to be registered. Select N to
only add the modifier descriptor.
PRINT ON CHECK Y or N
Select N to suppress printing of the modifier descriptor on the
guest check.
PRINT ON
RECEIPT
Y or N
Select N to suppress printing of the modifier descriptor on the
receipt.
AFFECT DIGIT 1-
14
1-14
Preceding a PLU with a Size and/or Modifier key manipulates
the PLU code assigned to the PLU key, causing a different
PLU to be registered when the PLU key is pressed. Enter the
digit of the PLU number you wish to be changed when using
this key. (Digit #1 is the rightmost digit; digit #14 is the
leftmost digit.)
VALUE OF
AFFECTED DIGIT
(0-9)
0-9
Enter the value you wish to be added in the digit position
selected. For example, if you wish to affect PLU digit #4
with a value of 1, then pressing this modifier key prior to the
registration of PLU #17 will result in the registration of PLU
#1017.
SEND
DESCRIPTION TO
KP
Y or N
Determines whether the modifier descriptor prints with the
item at the KP. (The modifier descriptor will print
immediately above the item.)
DISPLAY
DESCRIPTOR ON
LCD
Y or N
Option to display modifier descriptor is available on version
1.046 or later.