Sam4s SPS-300 Series - Endorsement Message

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 229
PRINT CHECK
2. Press the PRINT CHECK key to view the print check function key options:
PRINT CHECK PROGRAMMING
DESC : PRINT CHECK 
CHECK PRINT
COM PORT #(0-4) 0
AUTO SERVICE CHK N
PRT CHECK ON RECP N
SKIP PRT OF CONSEC#
ON CHECK N
3. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PRINT CHECK Key Program Notes
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a unique descriptor. The default descriptor
is PRINT CHECK.
CHECK PRINT
COMM PORT # (0-
2)
0-2
Select the port (1 or 2) where the check print printer is
attached. If 0 is selected, the check will print on the receipt
printer.
AUTO SERVICE
CHK
Y or N
Select Y if you want the Check Print function to
automatically service the check.
PRT CHECK ON
RECP
Y or N
Select Y if you want the Check Print function to print on the
receipt printer.
SKIP PRT OF
CONSEC# ON
CHECK
Y or N
Select Y if you wish to delete the printing of the consecutive
# on the guest check.