Sam4s SPS-300 Series - Time

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 255
4. Type the new or additional stock quantity and press CASH. Note that stock is
kept in decimal units and you must enter new or additional stock to two digits
beyond the decimal. For example, type 1 0 0 0 to enter ten units of inventory.
5. Return to step 2 to continue recording inventory, or press CLEAR to return to
the PROGRAM MODE menu.
Drawer Limit
You can set a limit for the drawer total. When cash in drawer exceeds the limit you program
here, a warning will display on the screen. You must press CLEAR to remove the warning
and continue operations. The warning will continue to appear at the completion of every
transaction with the limit exceeded, until you use the PAID OUT function to remove cash
from the drawer.
Set the drawer limit to 0 to disable the drawer limit warning.
1. From the PGM control lock position menu, press 00 for MORE. The
PROGRAM MODE page 2 screen displays.
2. From the PROGRAM MODE page 2 screen, press 2 for DRAWER LIMIT.
The LIMIT PROGRAM screen displays:
LIMIT PROGRAM
DRAWER LIMIT
0.00
3. Type the amount you wish to use for a limit (or type 0 for no limit.) Press
CASH.