260 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
Programming a New Macro
1. After selecting a new macro to program, the screens displays with the arrow
pointing at the first macro line:
1. 
2.
3.
4.
5.
6.
7.
8.
2. Press the first key of the macro sequence, for example, press 1 (numeric one):
1. ONE
2. 
3.
4.
5.
6.
7.
8.
3. The keystroke is recorded on the screen and the cursor moves to the next
keystroke.
To Next Page
Loading...
