290 • Integrated Payment Appendix SAM4s SPS-300 Operator's & Programming Manual v1.34
Close Batch
NOTE: To present things in a logical order, OPEN BATCH is shown at the beginning of the
day, but in practical day-to-day operation it is recommended to open a new batch right after
closing today’s batch, so it is ready to go for the next day.
1. Turn the control lock to the Clear Totals position to display the RESET
REPORT MODE menu:
RESET REPORT MODE
0.Z REPORTS
1.RESET E.J.
2.PC COMMUNICATION
3.MIX & MATCH PROGRAM
4.MIX & MATCH SCAN
5.PLU LOOKKUP PROGRAM
6.AGE VERIFICATION
2. Press PAGE DOWN to view the next page of the RESET REPORT MENU.
RESET REPORT MODE
9.DATATRAN(DEBIT)
00.DATATRAN
3. Press 00 to display the DataTran Operation menu, or if the application is using
debit, press 9.
DATATRAN OPERATION
0.INITIALIZE EFT
1.OPEN BATCH
2.CLOSE CURR. BATCH
4.CHG. BATCH NUMBER
5.ISSUE LOCAL TOTAL
6.ISSUE TRANSACTION
4. Press 2 to close the current batch. The message “WAITING RESP” displays.
When communication is complete, the Local Batch Status prints and the batch is
closed.
To Next Page
Loading...
