Sam4s SPS-300 Series - Coupon on Item (Store Coupon)

56 • Operations SAM4s SPS-300 Operator's & Programming Manual v1.34
Percent Key Operations
A total of five % functions are available. (%1, %2 & %3) are located on the default
keyboard of the SPS-320/340. Your keyboard may be different. More or fewer % keys may
be located on the keyboard, or they may be located on one of the function look up menu
keys.)
Each function is individually programmable to add or subtract, from an individual item or
from a sale total, amounts (coupons) or percentages. You can also program the percentage
key taxable or non-taxable, so that sales taxes are calculated on the net, or the gross amount
of the item or sale. You can also program preset prices or percentages.
The operation examples in this section show the percentage key in a variety of configurations.
See "Function Key Programming" in the "Program Mode Programming" chapter to assign a
specific function to each percentage key.
Preset Percent Discount on an Item
In this example the%1 function is preset with a rate of 10 %.
1. Register the item.
2. Press the %1 key:
% 1
3. The discount is automatically subtracted.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU2 $10.00
% 1 -10.000%
AMOUNT -1.00
TOTAL $9.00
CASH $9.00
CLERK 1 No.000011 00001
Enter a Percent Discount on an Item
You can also operate the percentage functions by entering the percentage of the discount or
surcharge. If necessary, you can enter a fractional percentage up two 3 digits beyond the
decimal (i.e. 99.999%).
1. Register the discounted item.
2. Enter the percentage. If you are entering
a fraction of a percent, you must use the
decimal key. For example, for one third
off enter:
3 . 33 3 3
3. Press the %1 key:
% 1
4.
The discount is automatically subtracted.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU2 $10.00
% 1 -33.333%
AMOUNT -3.33
TOTAL $6.67
CASH $6.67
CLERK 1 No.000011 00001