Sam4s SPS-300 Series - Page 92

92 • Operations SAM4s SPS-300 Operator's & Programming Manual v1.34
Not Found PLU
Note: The System Option “DISABLE NOT FOUND PLU” must be set to N(o) to allow
this function.
The “Not Found PLU” feature is available for use when an optional scanner is used to input
PLU’s. If an item is scanned that is not programmed in the PLU file, the operator has the
option to input the price of the item and assign it the same descriptor and properties of
another PLU, or enter the descriptor and tax status independently. This provides a simple
mechanism for quickly building an item file for a simple scanning installation. (Note:
Beginning at version 1.043, the error sound continually when a not found PLU is attempted.)
Quick Entry Method
1. Scan an item or input a PLU number. If the item is in the PLU file, it will
register, if an item is not in the PLU file, an error will sound continually.
2. Press CLEAR, the NOT FOUND PLU screen will display:
NOT FOUND PLU PROGRAM ?
0 : NO 1 : YES
3. Press the numeric “1” key to allow the registration of the PLU. The cursor will
point at the SELECT COPY PLU field.
NOT FOUND PLU PROGRAM ?
SELECT COPY PLU
0
PRICE: 0