Sam4s SPS-300 Series - Report Options

SAM4s SPS-300 Operator's & Programming Manual v1.34 Operations • 95
Quick Price Change
Beginning at version 1.081, the PRICE CHANGE Function key was added. This
version or later is required to use the quick price change function.
See “PRICE CHANGE” on page 228 to set the function key options for this key:
 You may need to place the key lock in the X position to complete this function (under
manager control).
 The new price you enter may permanently change the price, it may never change the
pre-programmed price, or it may prompt you to decide whether the new price is
permanent.
1. Press the PRICE CHANGE key.
PRICE
CHANG
E
2. Press a preset PLU key, or enter a PLU
number and press the PLU key:
1 PLU001
3. Enter the new price.
3 0 0
4. Press the PRICE CHANGE key again.
PRICE
CHANG
E