22 • SPS-300 Series Program Information SPS-300 SmartECR Supplement v1.11
MPP TIP Function Key
Beginning at STE v01.109 a new MPP TIP function key (key code 418) is provided for entering Tip’s in
register mode. If your application is set for “Fine Dining” you must place the MPP TIP function on the
keyboard. The MPP TIP key can be set to require manager approval for tip entry if desired.
The MPP TIP key allows you to enter gratuities without having to turn the mode lock to the Z position.
Refer to “TIP (Gratuity) Entry” on page 37 for the TIP entry operation.
Note: MPP TIP operation is performed outside a transaction.
1. From the PGM control lock position menu, press 5 for FUNCTION KEY. The FUNCTION
KEY PROGRAM screen displays:
2. Press the Datatran Tip function key to view the associated function key options:
MPP TIP PROGRAMMING
DESC : MPP TIP
UNDER MGR CONTROL N
SEND TO EFT Y
Required
Setting
3. Select Y (YES) or N (NO) for manager control.
4. Set Y (YES) for the “SEND TO EFT option.
5. Press the CASH key to finalize and then press CLEAR return to the main PROGRAM MODE
screen.
Note: If updating from the mBox to the SmartECR, do not load back the function key program
area; The Function key file has changed. If you do load back function keys, you will need to go back
and reprogram the descriptor for the MPP TIP function.
See “Restore Program from the SD Card” on page 16 for details.
To Next Page
Loading...
