Sam4s SPS-300 Series - Page 10

2 Product Specifications
2-4 SAM4S ER-900/SPS-300 SERIES
2-3 Thermal Printer Specifications
2-3-1 Printer Specification (With Cutter)
Item Description Remark
Model
• CAPD245
SII
Print Method
• Thermal Line Printing
Total Number of Dots
• 384 Dots / I Line
Printing Format
Dot Pitch
• Vertical : 0.125 mm
• Horizontal : 0.125 mm
Printing Speed
• 85 mm/Sec
Printing Direction
• Unidirectional Friction Feed
Feeding Method
• Friction Feed
Minimum Feed Pitch
• 0.0625 mm
Paper Feeding
Feeding Speed
• 85 mm/Sec
Power Voltage
• 6.5V~9.0V
Head/Motor
Power Supply Volt
Circuit Input Voltage
• 3.3V
Head Control/Sensor
Heat Element Density
• 8 Dots/mm (200dpi)
Total Head Elements
• 384 Dots / Dot Line
Available Printing Width
• 48 mm
Printer Head
Heat Element Typical Ω • 173 Ω ±3%
Line Feed Motor
• 1-2Phase Bi-Polar Stepping Motor
Head Temperature
• Thermistor
Paper-End Sensor
• Reflecting Photo Sensor
Printer Cover Open Sensor
• Micro Switch
Sensor
Cutter Home Sensor
• Transmissive Type Photo Sensor
Auto Cutter Type
• Guillotine Type
TPH
• 50Km / 1x10
8
Pulse
Reliability
Auto-cutter
• 500,000 Cuts
Dimension (mm)
• 83.1 (W) ×35.4 (D) ×26.9 (H)
Weight
• Approx. 125 g
Table2-3 Thermal Printer Specifications (With Autocut)
All manuals and user guides at all-guides.com