100 • Management Functions Sam4s SPS-300 OP Manual v1.35
If you chose IRC 2 : SELECT, then the register selection displays:
X REPORT OPTIONS
RPT# : FINANCIAL
1. TYPE 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISPLAY 0
3. IRC 2
0:STANDALONE
# 1Y
2N 3N 4N 5N 6N 7N 8N
Press the YES/NO key at each register # to select whether you wish to include each
register in the consolidated report. Press CASH after each selection. After the last
selection, the report will start.
Field Description
TYPE
Select X1 or X2 if available for the selected report.
OUTPUT
Select PRINT or DISPLAY output.
IRC
Select STANDALONE, ALL, or SELECT if available
for the selected report. If SELECT, the screen will
prompt for selection of registers - the screen will
initially show the registers available from the from/to
IRC register programming, for example if the IRC
range is from 1 to 3, then the selection will default to:
1 2 3 4 5 6 7 8
Y Y Y N N N N N
To Next Page
Loading...
