102 • Management Functions Sam4s SPS-300 OP Manual v1.35
Register Print Format
You can designate the SPS-320 printer to print either a receipt, or a sales journal. If you select
journal format, the preamble/postamble will not print. If you select receipt format, the
preamble/postamble will print and the receipt will feed sufficiently for paper tear-off.
From the MANAGER MODE menu press 3 to set the receipt format:
REG. PRINTING FORMAT
REGISTER PRINTING IS
CURRENTLY RECEIPT
TO SET TO JOURNAL
PRESS YES AND ENTER
The REG. PRINTING FORMAT screen displays. Press the YES/NO key to toggle
from receipt to journal format. The screen will display the current printer format.
Press the YES/NO key and then CASH to set the new format.
Stop Register Printing
You can turn the register printer to an on or off condition. In the off condition, transactions will
not be printed, but reports will continue to print, if requested.
From the MANAGER MODE menu press 4 to set receipt printing on or off, or press
5 to set journal printing to on or off (SPS340/345 only):
REG. PRINTING ON/OFF
REGISTER PRINTING
IS CURRENTLY ON
TO TURN OFF
PRESS YES AND CASH
The REG. PRINTING ON/OFF or JOURNAL PRINTING ON/OFF screen
displays. Press the YES/NO key to toggle from receipt on to receipt off. The screen
will display the current printing status. Press CASH to set the new format.
Note: When the receipt is off, a receipt may be printed after the sale by pressing CASH after the
transaction is complete.
To Next Page
Loading...
