150 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
PLU Programming
To accommodate UPC scanning, each PLU can be given an identifying number up to 14 digits in
length.
At the PGM control lock position menu, press 0 for PLU Programming. The PLU
PROGRAMMING screen displays:
PLU PROGRAMMING
0.ADD/MODIFY PLU
1.DELETE PLU
Add/Modify PLU
Press 0 to add or modify a PLU. The PLU NUMBER screen displays:
PLU NUMBER
* ENTER PLU NUMBER
AND PUSH PLU, OR
* PRESS A PLU KEY ON
THE KEYBOARD
0
To view the PLU # PROGRAMMING screen:
a. Enter the number for the PLU you wish to program and press the PLU
function key, or
b. Press a PLU key located on the keyboard, or
c. Press a modifier key followed by a PLU key located on the keyboard, or
d. Scan the barcode on an item.
Refer to "PLU Options - Reference Information" on page 152 to make program
entries or changes, press the CLEAR key to finalize and return to the PROGRAM
MODE screen.
To Next Page
Loading...
