154 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Option Entry Description
SCALEABLE Y or N If Y, the PLU will work only when you are multiplying a
weight from an optional scale or when multiplying a
manually entered weight. (For example, enter weight, press
SCALE, then register PLU.)
AUTO SCALE Y or N Select Y if you wish entries into this PLU to be
automatically multiplied by the weight on the optional scale
AUTO TARE (1-5) 0-5 Enter a value (1-5) to indicate the number of the
preprogrammed tare weight you want to automatically
subtract when the PLU is used for a scale entry (using an
optional scale). Enter 0 to disable automatic tare
subtraction.
CONDIMENT Y or N Select Y if you wish the item to act like a condiment on the
kitchen printer. Items with this status will satisfy the
requirements of items with compulsory condiment status.
COMPULSORY
CONDMNT
Y or N Select Y if you wish to force the entry of a condiment after
this item is entered.
PRINT ON
RECEIPT
PRINT ON
DISPLAY
PRINT ON CHECK
Y or N Select N if you wish to suppress printing (or display) of the
item at the designated location.
PRT PRICE ON
RCPT
Y or N Select N if you wish to suppress printing of the item's price
on the receipt.
PRT PRICE ON
CHK
Y or N Select N if you wish to suppress printing of the item's price
on the check.
DISABLE PROMO Y or N Select Y to block the PROMO function on this PLU.
COUNTER NOT
RESET
Y or N Select Y if you do not wish to reset the PLU item counter on
the Z PLU report.
PRESET
OVERRIDE IN
MGR CONTROL
Y or N If preset override is Y, then you can force manager control
for preset override by setting this option to Y.
LINK PLU 14 digits
maximum
If you wish the registration of this PLU to automatically
cause the registration of another PLU, enter the PLU # you
wish to link with the 10-key pad. Enter 0 for no link.
MIX&MATCH# 0-99 Enter a value (1-99) to indicate the number of the
preprogrammed MIX&MATC TABLE. Enter 0 to disable
DISABLE VOID
MODE & RETURN
Y or N If N, you cannot correct this PLU through void mode nor can
you perform a merchandise return of this PLU item. The Y
value is recommended when using liquor control systems.
To Next Page
Loading...
