Sam4s SPS-300 Series - Page 171

Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 167
Programming a Canadian GST
Tax 4 can be programmed to accommodate the Canadian Goods and Services tax (GST).
Turn the control lock to the PGM position.
From the PROGRAM MODE menu, press 2 to view the TAX PROG. screen:
TAX PROGRAMMING
TAX NUMBER (1-4) 4
DESC : TAX4
TAX TYPE (0-2) 0
0 : ADD-ON
1 : TAX TABLE
2 : VAT
When the arrow is pointed at the TAX NUMBER field, enter 4, press CASH
(CASH).
The arrow will move to the DESC. field. Enter a descriptor for the tax rate if desired;
Press CASH.
The arrow will move to the TAX TYPE field. Press CASH. The TAX #4
PROGRAMMING screen displays:
TAX #4 PROGRAMMING
TAX RATE 0.000
GST IS TAXABLE BY
RATE 1 N
RATE 2 N
RATE 3 N
When the arrow is pointed at the TAX RATE field, enter the GST rate. For example,
if the tax is 6 percent, enter 6.000 or 6.0. If the tax is 7.5 percent, enter 7.500 or 7.5
using the decimal key. If the tax is 10 percent, enter 10.000 or 10.0. Press CASH to
set the rate.
At the RATE 1 field, indicate if the GST is taxable by rate 1 (tax on tax) by pressing
the YES/NO key, then pressing the CASH key. The arrow advances to the RATE 2
field. Enter taxable status for RATE 2 and RATE 3. The PROGRAM MODE
screen returns.