Sam4s SPS-300 Series - Programming a New Macro

Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 237
Logo Descriptor
From the PGM control lock position menu, press 7 for LOGO DESC. The LOGO
DESC. PROGRAM screen displays:
LOGO DESC. PROGRAM
0.PREAMBLE
1.POSTAMBLE
2.ENDORSEMENT MESSAGE
3.FINANCIAL REPORT
4.CLERK REPORT
5.MIX & MATCH NAME
6.DATATRAN
Preamble
The preamble is a programming message of up to six lines of 32 characters that appears at the
top of each receipt and/or guest check.
From the LOGO DESC. PROGRAM screen, press 0 to display the PREAMBLE
screen:
PREAMBLE ↓
LINE 1 :

LINE 2 :
LINE 3 :
Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the descriptor.
For the SPS-345 use the descriptor code method (see page 147.) Each line can be up
to 32 characters. If you make a mistake, press the BACKSPACE key (on the alpha
overlay or enter the backspace code 97 if you are using the descriptor code method)
to erase the previous character. After you have completed typing the first line, press
CASH to accept the new line and advance to the second line, or press CLEAR to
return to the LOGO DESC. PROGRAM screen without making any changes.