252 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
PLU Stock
If you designate a PLU as an inventory item (see PLU programming) then a special PLU stock
counter keeps a running inventory count. This program is where you can set the current
inventory level.
• Refer to "System Option Programming" on page 168 to determine whether the
quantity of inventory you enter in this program adds to existing inventory quantity, or
whether it replaces the current inventory quantity.
• Inventory is kept in decimal units two digits beyond the decimal. For example, if
1.75 pounds are multiplied times the PLU with the preset price per pound of apples,
1.75 is subtracted from the PLU representing apples.
To Program Inventory
From the PGM control lock position menu, press 00 for MORE. The PROGRAM
MODE page 2 screen displays.
From the PROGRAM MODE page 2 screen, press 1 for PLU STOCK. The PLU
NUMBER screen displays:
PLU NUMBER
∗ ENTER PLU NUMBER
AND PUSH PLU, OR
∗ PRESS A PLU KEY ON
THE KEYBOARD
0
Enter the PLU number and press the PLU key, or press an PLU key on the keyboard.
The stock quantity for the selected PLU displays:
PLU# 1 P1
STOCK QUANTITY
0.00
To Next Page
Loading...
