258 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Programming a New Macro
After selecting a macro to program, the screen displays with the arrow pointing at the
first macro line:
1.
2.
3.
4.
5.
6.
7.
8.
Press the first key of the macro sequence, for example, press 1 (numeric one):
1. ONE
2.
3.
4.
5.
6.
7.
8.
The keystroke is recorded on the screen and the cursor moves to the next keystroke.
Continue to enter keystrokes until the macro is complete. Press CLEAR to end the
macro recording and return to the MACRO PROGRAM screen. If you wish to add
a function to a macro that is not located on the keyboard, or if you wish to include the
CLEAR, Y/N, PAGE UP, or PAGE DOWN function to a macro string (these keys
are used for editing purposes inside this program), press PAGE DOWN to display a
key code list:
FUNCTION KEYCODE
-------------------------------
NLU#1 - NLU#150(1-150)
ONE 301
TWO 302
THREE 303
FOUR 304
FIVE 305
With the key code list displayed, press PAGE DOWN and PAGE UP to find the
function you wish to add to the macro. Type the numeric code number; press CASH.
The function is added to the macro.
To Next Page
Loading...
