Sam4s SPS-300 OP Manual v1.35 Operations • 69
Check Cashing
Check cashing means exchanging cash for a check. If you wish to cash checks, you must place a
CHKCASH key on the keyboard. See "Function Key Assignment" in the "Program Mode
Programming" chapter.
1. Enter the amount of the check tendered
by the customer. For example, for
$20.00 enter:
0 0 02
2. Press CHKCASH:
CHK
CASH
3. The display will indicate the amount of
the check and the cash change.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
***CHKCASH***
CHECK $20.00
CASH -20.00
CLERK 1 No.000011 00001
Split Tender
Split tendering is paying for one transaction by more than one payment method. For example, a
$20.00 sale could be split so $10.00 is paid in cash, and the remaining $10.00 is paid by a check.
If necessary, you can make several different payments.
Note: By default, CASH and/or CHECK under tenders are allowed. This can be changed
through function key programming.
1. Register the items you wish to sell.
2. Enter the amount of cash tendered by the
customer. For example, enter $10.00 and
press CASH:
CASH 0 0 1 0
3. The display will indicate the $10.00 cash
tender and the $10.00 total still due.
4. Enter the amount of check tendered by
the customer. For example, enter $10.00
and press CHECK:
CHECK0 01 0
5. When the total tendered equals or
exceeds the total due, the receipt will
print and the transaction is complete.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU2 $20 00
TOTAL $20.00
CASH $10.00
TOTAL $10.00
CHECK $10.00
CLERK 1 No.000011 00001
To Next Page
Loading...
