Samba CLEAN FORCE User Manual (English)

Questions and Answers:

X
xlongJul 29, 2025
Why is my Samba CLEAN FORCE losing suction?
- L
  Lisa SmithJul 29, 2025
  If your Samba Vacuum Cleaner isn't picking up dust and the suction is weak, it might be due to a full dust container. Empty the dust container to resolve this. Alternatively, the dust filter may need cleaning or replacing. Remove the dust filter assembly and check for any obstructions in the suction inlet, removing any found. Clean or replace the dust filter assembly. Also, ensure the unit is adequately charged by charging it.
J
justingomezAug 4, 2025
How to fix a Samba CLEAN FORCE Vacuum Cleaner that won't turn on?
- M
  Miranda Johnson MDAug 4, 2025
  If your Samba handheld vacuum cleaner isn't working, there are several potential causes. First, the batteries might be discharged, so try charging the unit. Also, make sure that the charger is unplugged. Check the electrical outlet supplying the transformer for power by checking the fuse or breaker and replacing or resetting it as necessary. Finally, the connector between the unit and the charger might be dirty; wipe and clean any dirt from the connector.
A
Annette ClarkAug 9, 2025
What to do if my Samba CLEAN FORCE Vacuum Cleaner is leaking dust?
- C
  Christina McmillanAug 10, 2025
  If you notice dust leaking from your Samba handheld vacuum cleaner, the dust container might be full; empty it. Another possibility is that the dust filter isn't installed correctly; review the dust filter assembly installation instructions. Finally, inspect the dust filter for any punctures or holes, and replace the dust filter assembly if needed.
A
Ashley GreenAug 15, 2025
Why does my Samba CLEAN FORCE make a strange noise?
- M
  Mrs. Katie SmithAug 15, 2025
  If your Samba Vacuum Cleaner is making a strange noise, stop using it immediately. The floor brush and dust filter might be blocked by large dust particles, or the dust container might be full. Clean the dust filter assembly and floor brush, and empty the dust container. If the noise persists after these steps, please call customer service.
A
Angela JohnsonAug 22, 2025
Why is the brush not spinning on my Samba CLEAN FORCE?
- J
  jamieaustinAug 22, 2025
  If the motorized brush on your Samba Vacuum Cleaner isn't working, check the tube and brush connections. Also, if the roller does not rotate, check for obstructions and ensure it is correctly placed.