13 BEEP Keypad tone OFF/ON
14 ROGER Roger beep tone OFF/ON
15 SAVE Battery save OFF/ON
16 BCLO Busy channel lock-out OFF/ON
17 STE Squelch tail elimination OFF/ON
18 SHIFTF Offset frequency 0.000~80.000
19 SHIFT Offset frequency direction OFF/+/-
20 CHNAME Edit channel name ------
21 DSPMOD Channel display mode FREQ/CH/NAME
22 STEP Frequency step
2.5/5/6.25/10/12.5/25/5
0/100
23 BAND Channel bandwidth WIDE/NARROW
24 DW Dual watch OFF/ON
Detail Function Introduction
01/02/03 – CTCSS/DCS (C-CDC, R-CDC, T-CDC)
CTCSS and DCS are functions that reject undesired signals
on your channel. You will hear a call only when you receive a
signal that contains a matching CTCSS tone or DCS code. If a
call containing a different tone or code is received, squelch will
not open and you will not hear the call. Likewise, when
transmitting using CTC
SS or DCS, the receiving station must
have a matching tone or code to hear your call. Be aware that
other parties can still hear your calls if they set up their radio
with the same tone or code. It selects a CTCSS/DCS privacy
code to be used when transmitting or receiving carrier for the
current channel. No privacy code will be checked when carrier
is received if “No CTCSS/DCS code” is chosen.
Pro
cedure:
1) Press [ ] button to enter menu mode, then select No.1
‘C-CDC’, No.2 ‘R-CDC’ or No.3 ‘T-CDC’ item.
2) Press side button P1 to select among OFF, CTCSS and
DCS.
OFF: No CTCSS/DCS code
CTCSS: 67.0 – 254.1Hz.
To Next Page
Loading...
