Need help?Do you have a question about the Samlexpower MSK-90 and is the answer not in the manual?
General| Brand | Samlexpower |
|---|---|
| Model | MSK-90 |
| Category | Solar panel |
| Language | English |
Key safety instructions to read before using the kit to prevent injury or damage.
Explanation of warning, caution, and information symbols used in the manual.
Warnings regarding water resistance, grounding, battery types, and polarity.
Precautions for handling batteries, including ventilation, explosive gases, and chemical contact.
Safety guidelines for handling solar panels, including covering, avoiding short circuits, and cleaning.
Overview of MSK-135 and MSK-90 portable solar battery charging kits.
Lists various applications where the solar charging kits are suitable.
Details on modular design, high-efficiency polycrystalline solar modules, and panel construction.
Description of the state-of-the-art, 10A rated PWM Solar Charge Controller MSK-10A.
Explanation of the folding support legs and tilt adjustment mechanism for optimizing sun exposure.
Guidance on adjusting azimuth and tilting for maximum solar energy capture and system efficiency.
Highlights the foldable design for convenient transport and storage in a carrying case.
Details on the plug-and-charge system, including battery cable and extension cable with connectors.
Important safety warnings for installation, especially regarding wet environments and positive grounding.
Diagram and explanation of the connection arrangement for modules, charge controller, battery, and load.
Instructions for connecting solar modules to the charge controller for MSK-90 and MSK-135 kits.
Details on connecting the charge controller to the battery using provided cables and connectors.
Information on using extension cables and the required 10A fuse for battery connection.
Instructions on correctly connecting battery alligator clips, emphasizing polarity and fuse blowing.
Guidelines for connecting DC loads (up to 10A) to the charge controller's load terminals.
Brief operational overview of the MSK-10A PWM Charge Controller, its design, and optimization.
Instructions for connecting DC loads exceeding 10A directly to the battery.
Explanation of PV and BATT status LEDs, their colors, patterns, and meanings.
Detailed description of PV and BATT status LED indicators and their corresponding states.
Diagram of the MSK-135 layout with numbered components and their descriptions.
Detailed explanation of various LED indicators (PV, BATT, LOAD, battery type) and their functions.
Explanation of LED indicators related to battery discharge levels and load status.
Instructions on how to select and set the correct battery type (Flooded, AGM, Gel).
Cautionary notes regarding solar module power generation and spurious LED indications.
Describes LED indications when modules are exposed to sunlight but the battery is not connected or removed.
Detailed procedure for setting the battery type using the setting button and observing status LEDs.
Steps to diagnose why the PV status LED is not lighting up.
Explanation for the BATT LED not flashing slowly and battery charging status.
Troubleshooting steps for specific LED indications when modules are exposed to sunlight and battery is connected/removed.
Diagnosing and resolving issues where the battery appears fully charged but dies quickly.
Troubleshooting over-temperature protection indicated by simultaneous flashing of 'Sealed', 'Gel', 'Flooded' LEDs.
Diagnosing and resolving overload or short circuit issues indicated by the LOAD LED.
Instructions for cleaning and maintaining the solar module surface to ensure optimal performance.
Technical specifications for the solar array, including power, voltage, current, efficiency, and IP rating.
Specifications for the MSK-10A Charge Controller, including type, voltage, current, and battery type support.
Details on battery cable sets provided, including length, gauge, connectors, and product dimensions.
Weight specifications for the MSK-135 and MSK-90 kits, with and without bag/cables.
Details of the 2-year limited warranty for MSK-90 & MSK-135 kits in the US and Canada.
Procedure for making a warranty claim, including return authorization and required documentation.
Conditions that void the warranty and limitations on liability for damages.
To Next Page