What to do if Sammons Preston Tropic 4-Pac is plugged in but the water doesn't get hot?
If your Sammons Preston Heater isn't heating the water despite being plugged in, there could be a few reasons. First, check if the breaker for the electric circuit is off and turn it on. If the breaker is on, the thermostat might not be functioning and needs to be replaced. Alternatively, the heating element could be burned out, requiring a replacement.
Why are the packs too hot in my Sammons Preston Tropic 4-Pac?
If the packs in your Sammons Preston Heater are too hot, it could be due to the thermostat being set too high; try adjusting it to a lower setting. Another possible cause is a thermostat failure, which would require replacing the thermostat.
What to do if I see rust or discoloration in my Sammons Preston Tropic 4-Pac Heater?
If you notice rust or discoloration in your Sammons Preston Heater, it could be due to a few reasons. First, check for any contact with ferrous material like staples or paper clips and remove them, then clean the unit thoroughly. If your local water has high chlorine content, add a dechlorinating agent. It could also be due to deposits on the inside of the tank, so thoroughly clean the tank to remove all deposits. Finally, too much chlorine in the water may cause this problem. Clean the tank and rinse thoroughly, then add a dechlorinating agent if needed.
Why is my Sammons Preston Tropic 4-Pac boiling?
If your Sammons Preston Heater is boiling, it is likely due to thermostat failure. The suggested solution is to replace the thermostat.
Why are the packs too cool in my Sammons Preston Heater?
If the packs in your Sammons Preston Heater are too cool, it could be because the thermostat is set too low. Try adjusting the thermostat to a higher setting. Alternatively, the thermostat may have failed and need to be replaced.
General| Brand | Sammons Preston |
|---|---|
| Model | Tropic Heater 4-Pac |
| Category | Heater |
| Language | English |
Defines safety symbols like CAUTION, WARNING, and DANGER used in the manual.
Lists general safety rules and warnings for operating the heating unit.
Explains the meaning of various safety symbols used in the manual.
Describes the function of indicator lamps on the unit.
Illustrates and labels parts of the heating units with diagrams.
Lists and describes components not illustrated in previous diagrams.
Details specifications for Tropic Heater 4-Pac 120V and 220/240V units.
Details specifications for Tropic Heater 6-Pac 120V and 220/240V units.
Details specifications for Tropic Heater 8-Pac 120V and 220/240V units.
Details specifications for the Tropic Heater 8-Pac Mobile 120V unit.
Details specifications for Tropic Heater 12-Pac Mobile 120V and 220/240V units.
Steps for preparing the unit, including filling and connecting power.
Guide on how to use the controls and operate the heating unit.
Warns against moving the unit while filled with hot water due to tipping hazard.
Provides guidance on cleaning the interior and exterior of the unit.
Instructions on how to care for and maintain the Tropic Pacs.
Details what the warranty does not cover and liability limitations.
Lists part numbers for the Tropic Heater 4-Pac 120 Volt model.
Lists part numbers for the Tropic Heater 4-Pac 220/240 Volt unit.
Lists part numbers for the Tropic Heater 6-Pac 120 Volt model.
Lists part numbers for the Tropic Heater 6-Pac 220/240 Volt unit.
Lists part numbers for the Tropic Heater 8-Pac 120 Volt model.
Lists part numbers for the Tropic Heater 8-Pac 220/240 Volt unit.
Lists part numbers for the Tropic Heater 8-Pac Mobile 120 Volt unit.
Lists part numbers for the Tropic Heater 12-Pac Mobile 120 Volt unit.
Lists part numbers for the Tropic Heater 12-Pac Mobile 220/240 Volt unit.
To Next Page