EasyManua.ls Logo

Samson 3725 series - Technical Data

Samson 3725 series
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.1 Technical data
10 EB 8394 EN
Technical data
Type 3725 Positioner
Travel, adjustable Direct attachment to Type 3277 Actuator: 3.75 to 30 mm
Attachment acc. to IEC 60 534-6-1 (NAMUR): 3.75 to 50 mm
Attachment to Type 3372 Actuator: 15/30 mm
Attachment to rotary actuators: 24 to 100°
Reference
variable w
Signal range 4 to 20 mA · Two-wire device with reverse polarity protection
Split range
operation
4 to 11.9 mA and 12.1 to 20 mA
Static destruction
limit
±
33 V
Minimum current 3.8 mA
Load impedance
£
6 V (corresponds to 300
W
at 20 mA)
Supply air
Supply pressure 1.4 to 7 bar (20 to 105 psi)
Air quality
acc. to
ISO 8573-1 (2001)
Max. particle size and density: Class 4 · Oil content: Class 3
Pressure dew point: Class 3 or at least 10 K below the lowest ambient temperature
to be expected
Signal pressure (output)
0 bar up to the capacity of the supply pressure · Can be limited to approx. 2.4
bar by software
Characteristics 3 characteristics for globe valves · 9 characteristics for rotary valves
Hysteresis
£
0.3 %
Sensitivity
£
0.1 %
Transit time < 0.5 s not permissible for initialization, adaptation using volume restriction
Direction of action w/x reversible
Air consumption
£
100 l
n
/h with a supply pressure up to 6 bar and a signal pressure of 0.6 bar
Air output
capacity
Actuator pressurized At
D
p = 6 bar: 8.5 m
n
³/h
·
At
D
p = 1.4 bar: 3.0 m
n
³/h
·
K
Vmax (20 °C)
= 0.09
Actuator vented At
D
p = 6 bar: 14.0 m
n
³/h · At
D
p = 1.4 bar: 4.5 m
n
³/h · K
Vmax (20 °C)
= 0.15
Permissible ambient temperature
–25 to +80 °C
Limits in test certificates additionally apply for explosion-protected devices.
Influences
Temperature
£
0.15 %/10 K
Supply air None
Vibrations
£
0.25 % up to 2000 Hz and 4 g according to IEC 770
Electromagnetic compatibility
Complying with the requirements of EN 61000-6-2, EN 61000-6-3, EN 61326-1
and NAMUR Recommendation NE 21
Electrical connections
One M20x1.5 cable gland for 6 to 12 mm clamping range
Cage clamp terminals for 0.2 to 1.5 mm² wire cross-sections
Explosion protection II 2 G Ex ia IIC T4
Degree of protection IP 66

Related product manuals