Note concerning this Configuration Manual
The rotary pushbutton on the positioner allows the Type 3730-5 Positioner to be operated and
configured on site. In addition, the settings can be performed over the F
OUNDATION fieldbus
network or over the SAMSON SSP interface. The Mounting and Operating Instructions
EB 8384-5 EN describe the mounting, start up and on-site operation as well as configuration
over the SAMSON SSP interface using the TROVIS-VIEW software.
This Manual (KH 8384-5 EN) describes the basic principles and parameters for operation and
configuration using F
OUNDATION™ fieldbus.
Note: Information on the EXPERTplus diagnostics is included in the Operating Instructions
EB 8389 EN.
2 KH 8384-5 EN
To Next Page
Loading...
