Samson 3730-5 - Settings in TROVIS-VIEW software

16 Settings in TROVIS-VIEW software
16.1 General
The TROVIS-VIEW software allows various smart SAMSON devices to be configured over a
common operator interface. It consists of the operator interface, communication server, and
the device-specific module. The software has a Windows Explorer
®
look and feel.
The entire configuration of the positioner can be performed over the TROVIS-VIEW Configu
-
ration and Operator Interface. It is not possible to link function blocks of other devices with
the TROVIS-VIEW software. The TROVIS-VIEW software containing online help and the da
-
tabase module for Type 3730-5 Positioner is delivered on a CD-ROM (order number
6661-1058). Software updates are available in Internet (http://www.samson.de) in Services
> Support & downloads.
Note: The following instructions include a description on the key functions of the
TROVIS-VIEW software in conjunction with Type 3730-5 Positioner. Refer to the online help
in the ? menu for a detailed description.
16.1.1 System requirements
Hardware requirements
4
PC with Pentium II processor or equivalent (300 MHz or higher), 500 MHz recommended
4
Serial interface and USB/RS-232 adapter
4
Min. 96 MB RAM, 192 MB RAM recommended
4
Min. 150 MB free hard disk space plus approx. 10 to 15 MB additional hard disk space
per SAMSON module
4
SVGA graphic card (min. 800 x 600)
4
CD-ROM drive
Software requirements
4
Operating system: Windows
®
2000 (min. SP2), Windows
®
XP, Windows
®
Vista,
Windows
®
7
4
Microsoft
®
.NET Framework version 2.0 (included on the installation CD-ROM)
4
Internet browser: e.g. Microsoft
®
Internet Explorer
4
Adobe
®
Reader
®
Accessories
4
Serial interface adapter, order no. 1400-7700
(SAMSON SSP interface/RS-232 port of computer)
78 EB 8384-5 EN
Settings in TROVIS-VIEW software