To provide a better overview, the classified alarms are summarized in a condensed state
which is made up from a summary of all classified positioner alarms.
The condensed state appears in TROVIS-VIEW3 on the right-hand side of the info bar and in
the
Diagnosis
folder (>
Status messages
). The
Diagnosis
folder (>
Status messages
) indicates
which errors are responsible for setting the condensed state.
Note: Condensed state and status alarms are marked with in TROVIS-VIEW3 until they
are read out.
The reading of the condensed state is as follows:
EB 8384-5 EN 89
Settings in TROVIS-VIEW software
Condensed state TROVIS-VIEW3/DD Positioner display
Maintenance alarm red
Maintenance required/
Maintenance demanded
blue
Function check orange
Text, e.g.
tESting, TunE
or
tESt
No message green
To Next Page
Loading...
