CE Declaration
We, Samson Technologies Corporation, located at 45 Gilpin Ave, Hauppauge, NY 11788 USA declare under our own
responsibility that these devices are in conformity with the essential requirements of R&TTE Directive 1999/5/EC when
installed in accordance with the installation instructions contained in the product documentation. To the eect that the
standards and/or technical specications referenced below have been applied as indicated:
EN 50371:2002
EN 60065: 2002+A1+A11
EN 301 489-1 V1.8.1: 2008
EN 301 489.9 V1.4.1: 2007
EN 300 422-1 V1.3.2: 2008
EN 300 422-2 V1.2.2: 2008
Year of CE Marking (Low Voltage Directive): 2011
The products shall contain the CE marking and shall be accompanied by the identication number of the Notied Body
TÜV Rheinland Product Safety GmbH 0197. This equipment will also carry the Class 2 equipment identier.
Signed on behalf of the manufacturer:
Douglas Bryant
Vice President Engineering
03/05/2011
To Next Page
Loading...
