EasyManua.ls Logo

Samson dB1800a - DB1800 A Product Overview; General Description; Features; Architects & Engineers Specifications

Samson dB1800a
3 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRO
PRODUCT SPECIFICATION SHEET
PUBLIC ADDRESS
TYPE:
POWERED &
PASSIVE
PRODUCT DESCRIPTION
DB1800A
ACTIVE SUBWOOFER
SERIES
CATEGORY
DB PUBLIC ADDRESS
GENERAL DESCRIPTION
The dB1800a is a self-powered subwoofer featuring an
18” heavy duty driver, complemented by a 500 Watt power
amplifier. The dB1800a also offers an active stereo cross
-
over providing a high-passed output for running your satellite
speakers. Solid 3/4 inch plywood construction, steel corners,
tough carpet covering and larger casters make the dB1800a
a road warrior. In fixed installation systems, the dB1800a
provides super tight low frequency output in a relatively small,
unobtrusive enclosure. The dB1800a is a perfect add-on to
your dB500 and Expedition system, or for any sound rein
-
forcement system where extended low-end is desired. While
using your dB1800a, you’ll have great low-end anywhere.
FEATURES
> Heavy-duty, 18 inch Low Frequency Transducer With Butyl
Rubber Surround
> Built-in 500 Watt Power Amplifier
> Balanced High Pass Outputs for Satellite Speakers
> Variable Crossover 30 - 200 Hz
> Stereo / Mono Operation Switch
> Volume Control
> Heavy-Duty, Rear Mounted Casters
> Extra Large Grab Handles
> 35mm Pole Mount Receptacle
> Heavy-Duty, Steel Grill
> 3/4” Plywood Construction, internally braced and covered
in tough carpet
> Three-year extended warranty
ARCHITECTS & ENGINEER’S SPECIFICATIONS
The DB1800A shall be a wooden subwoofer cabinet to
be used as a FOH subwoofer. It shall be black and have
metal mesh grills. It shall have a 500 watt class G power
amplifier. It shall have a 18 inch woofer for low frequencies.
The DB1800A shall have 2 XLR balanced line inputs with
level control and frequency sweep control for the crossover.
The DB1800A shall have an amplifier clip and protection
LED indicator. The DB1800A shall also have a mono/stereo
switch. A standard IEC connector and cable will be supplied
for connection to AC power sources.
BACK PANEL
FRONT PANEL
©2006 Samson v1.0 5/06
This Manual: http://www.manuallib.com/file/2665564

Other manuals for Samson dB1800a

Related product manuals