Samson POWERBRITE PB9 Specifications

• Power distribution system.
• Adjustable pull-out fluorescent light.
• 19
″ 1U Rack space.
• 8 Rear panel vertical and horizontal
receptacles.
• Front panel 15 Amp circuit breaker.
• Front panel power on/off switch.
• Front panel unswitched receptacle.
• Customizable front panel inlay.
POWERBRITE
™
PB9
POWER DISTRIBUTION
AND
RACK LIGHT
The PowerBrite
™
is designed for live, studio and
fixed installation environments. This one rack space
AC power distribution unit is placed at the top of a
rack and supplies illumination to the entire rack via an
adjustable front panel pull-out fluorescent light. The
eight rear receptacles are arranged vertically and hori-
zontally to accommodate both AC plugs and power
supplies. The front panel features a power On/Off
switch, an unswitched receptacle (for additional
power needed for temporary uses as in soldering,
etc.), a 15 Amp circuit breaker and a special back-lit
inlay which can be customized to display a facility
logo or name.
Contact:
Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: (516) 364-2244 • Fax: (516) 364-3888 • www.samsontech.com
LIGHT OUTLETS UNSWITCHED 15 AMPERES
SAMSON
15
PowerBrite
™
PB9
A
M
P
PUSH
PUSH
SWITCHED
or
F
L
U
O
R
E
S
C
E
N
T
S
T
A
R
T
E
R
•
C
O
N
D
E
N
S
E
R
4
W
A
T
T
S
•
115V 60Hz 15A~
SWITCHED
MAXIMUM 15 AMPERE LOAD FOR ALL 9 OUTLETS
SAMSON
or
PowerBrite
PB9

Samson POWERBRITE PB9 Specifications

General

Brand	Samson
Model	POWERBRITE PB9
Category	Power distribution unit
Language	English