Samson Series 3730 - Article Code

2-2 EB 8384-3 EN
Markings on the device
2.2 Article code
Positioner Type3730-3 x x x x x x x x 0 x 0 0 x 0 x x
Withdisplayandautotune,HART
®
communication,4to20mAsetpoint,two
software limit switches, one fault alarm contact
Explosion protection
Without 0
ATEX II2GExiaIICGb;II2DExiaIIICT80°CDb;II2DExtbIIICT80°CDb 1
CSA Ex ia IIC T6; Class I, Zone 0; Class I, Groups A,B,C,D;
Class II, Groups E,F,G; Class I, Zone 2;Class I, Div.2 Groups A,B,C,D;
Class II, Div.2 Groups E,F,G
3
FM Class I, Zone 0 AEx ia IIC; Class I, II, III; Div. 1, Groups A, B, C, D, E, F, G;
Class I, Div. 2, Groups A, B, C, D; Class II, III. Div. 2, Groups F, G
ATEX II2DExtbIIICT80°CDb 5
ATEX II3GExnAIIT6Gc,II3DExtcIIICT80°CDb 8
ATEX II 2G Ex d[ia] IIC T6 Gb 9
Option (additional equipment)
Inductive limit switch
Without 0
SJ2-SN (NC contact) 1
Solenoid valve
Without 0
With,24VDC 4
Position transmitter
Without 0
With 1 0 0 0
External position sensor
Without 0
With 0 1 0
Prepared connection 0 2
Analog input x 0 0 0 3 0 0
Leakage sensor
Without 0
With 0 0 1 0
Binary input
Without 0
With 0 0 0 2
Diagnostics
EXPERTplus 4
Housing material
Aluminum (standard) 0
Stainlesssteel1.4408 0 1