Wireless Mouse
SMS-09B1/ SMS-09D1
Usuage
I. Battery Installation
1. Unlock the bottom cover of the mouse by
pushing the switch to the unlock position as
show in the figure on the previous page
2. Insert one AAA battery,
matching the polarity between the battery and the battery
compartment.
3. Close the bottom cover and
lock it by pushing the switch to the lock position
II. Connection
1. Unlock the bottom cover of the mouse by
pushing the switch to the unlock position as
show in the figure on the previous page
2. Take out the wireless dongle
which has been stored under the mouse
3. Close the bottom cover and
lock it by pushing the switch to the lock position
4.
Connect the wireless dongle a
USB port of your computer (the computer would run
hardware installation when you first use the product)
To Next Page
Loading...