6
Function 1: press the parking monitoring [parking monitoring] before
the shutdown, then the machine P "along the right of the screen will
be displayed, the machine will enter the parking mode. After parking
mode to turn it off, if there is a foreign substance to the machine or the
car, then the machine will automatically boot for video about 20
seconds to turn it off again.
if you want to cancel the function in the press stop monitoring after
open parking mode , then P "in the upper left corner disappears, this
represents the machine will not parking in execution mode function.
7.lock/menu:
Function 1 ：lock key
short press/lock key on current are video file fragments can lock or
unlock the protection.
Function 2: menu
In standby mode, short press the lock key into video menu, press it
again to enter the Settings menu, in the Settings menu mode
then/lock key will automatically exit to video mode.
In photo mode, short press the lock key into the photo menu, press it
again to enter the Settings menu, in the Settings menu mode
press/lock key will automatically quit again to photo mode.
To Next Page
Loading...